Agricultural tuning files for tractors & harvesters
More pulling power under load, steadier engine speed in heavy work and a calibration developed for the exact software of your machine – for every major agricultural brand.
- 73 brands · 2102 models
- 3951 engine variants
- Files from €100.00 · options from €50.00
Power where the work is done
A tractor rarely needs more top speed – it needs torque under load. Ploughing, cultivating, mowing with a wide combination or driving a heavy PTO implement keeps the engine at high load for hours. An optimised calibration increases torque in exactly this range, so the engine holds its speed instead of dropping into the next gear.
Manufacturers often use the same engine across several models and limit the output purely by software to create their model ranges. Our agricultural tuning files use these reserves carefully: injection quantity, rail pressure, boost and torque curves are adjusted together – with many files verified on the dyno.
Agricultural ECUs are a speciality of their own – many of them are read on the bench or in boot mode, often with a dedicated truck/agri protocol. Our calibrators work with these systems every day and develop the file for the exact software version you upload.
More torque at working rpm
The machine holds its speed better under heavy draft and PTO load.
Efficient rev range
Work in the efficient part of the rev range instead of constantly at full load.
Safe for long hours
Temperature and smoke limits stay active – made for long working days.
Per software version
Developed for the exact ECU software read from your machine.
Most common ECUs in this segment
Every machine on the farm
Agricultural machinery is one of our main areas – from the compact tractor to the self-propelled forage harvester.
Tractors
Standard, high-horsepower and vineyard / orchard tractors – John Deere, Fendt, Case IH, New Holland, Claas, Massey Ferguson, Deutz-Fahr, Valtra and more.
Combine harvesters
More reserves in heavy or wet crop – Claas Lexion and Tucano, John Deere S/T series, New Holland CR/CX, Case IH Axial-Flow, Fendt IDEAL.
Forage harvesters
Constant engine speed for the chopper drum – Claas Jaguar, Krone BiG X, John Deere 8000/9000, New Holland FR.
Telehandlers & loaders
Agricultural telehandlers and wheel loaders from JCB, Manitou, Merlo, Claas Scorpion, Kramer, Weidemann and Schäffer.
Sprayers & self-propelled
Self-propelled sprayers and special machines – Horsch, Agrifac, Hagie, Berthoud, Tecnoma and others.
Special machines
Feed mixers, sugar beet harvesters, manure tankers and municipal tractors (Aebi Schmidt, Siloking, Ropa, Holmer …) on request.
ECU and engine systems we work with every day
Read and write tools we support
Upload the read exactly as it comes from your tool – bench, boot or diagnostic port. We identify ECU and software version automatically.
Agricultural tuning is our speciality – not a side line
Many file services focus on cars and treat tractors as an exception. For us, agricultural and construction machinery is a core business: with 73 agricultural brands in the database, calibrators who work with Denso, Cummins, Deutz and Bosch agricultural ECUs every day and files built for long hours under full load.
Agri calibrators
Our calibrators work with tractor and harvester ECUs every day – including bench and boot reading.
Built for full load
Calibrations aim at torque at working rpm for draft and PTO work – not at peak numbers.
Long working days
Temperature, smoke and component protection stay active for hours at full load.
Fast in the season
Files for common tractors are ready quickly – support in the portal when every hour counts.
Agricultural brands in our database
Select the brand to see every model and engine with stock and tuned figures, ECU and read tools.
Examples from the database
| Machine | Engine | Stock | Tuned | Gain |
|---|---|---|---|---|
| Caterpillar 3406E | 14.6 - 381hp - 2108 Nm | 381 HP / 2108 Nm | 465 HP / 2650 Nm | +84 HP / +542 Nm |
| Case STX | 480 - 14.9 | 492 HP / 2000 Nm | 620 HP / 2500 Nm | +128 HP / +500 Nm |
| Case Magnum | 245 8.3 CR | 245 HP / 2002 Nm | 315 HP / 2450 Nm | +70 HP / +448 Nm |
| Krone BIG | M - 400 - 12.8 - R6 | 383 HP / 1900 Nm | 475 HP / 2320 Nm | +92 HP / +420 Nm |
| Claas Axion | 950 - 416hp | 416 HP / 1650 Nm | 521 HP / 2063 Nm | +105 HP / +413 Nm |
| Caterpillar C15OHE | 15.2 - Acert - 441hp - 2102 Nm | 441 HP / 2102 Nm | 520 HP / 2500 Nm | +79 HP / +398 Nm |
| Challenger TerraGator | TG8300 - 8.4 - 398hp | 398 HP / 1540 Nm | 500 HP / 1930 Nm | +102 HP / +390 Nm |
| Caterpillar C13OHE | 12.5 - 416hp - DPF - 1966 Nm | 416 HP / 1966 Nm | 480 HP / 2350 Nm | +64 HP / +384 Nm |
| Caterpillar C16OHE | 15.2 - DPF - 558hp - 2509 Nm | 558 HP / 2509 Nm | 629 HP / 2890 Nm | +71 HP / +381 Nm |
| Claas Xerion | 3800 - 344hp | 344 HP / 1620 Nm | 400 HP / 2000 Nm | +56 HP / +380 Nm |
Your machine is not listed? Upload the read anyway or contact us – we develop files for unlisted engines on request.
What farmers and contractors notice after the remap
- Heavy draft work: ploughing and deep cultivation with fewer downshifts.
- PTO work: mowers, balers, forage harvesters and slurry pumps run at a steadier speed.
- Transport: stronger pulling with full trailers on hills and in hilly terrain.
- Harvesters: more reserves when the crop is heavy or wet.
How an agricultural tuning file is made
- Read the ECU – most tractor ECUs are read on the bench or in boot mode. Always save a full backup.
- Upload the original file with the machine data (brand, model, engine, hours) in the portal.
- Calibration – our calibrators adjust torque, injection, boost and limiters for the exact software version.
- Download & write – the checksum-corrected file is ready to flash.
Warranty, maintenance and dealer updates
A remap changes the engine calibration. Ask your dealer about the warranty status of new machines before tuning. If the dealer updates the ECU software during a service, the tuning file is overwritten – keep your original read and upload the new software version so we can develop a matching file.
Read more in our guide Tractor remapping – what to know.
Questions & answers
How much more power does a tractor remap give?
Typically 10–25% more power and torque, depending on the engine and how strongly the manufacturer limited it by software. The exact figures for every engine are listed in our vehicle database.
Does a remap increase fuel consumption?
Fuel consumption depends mainly on the work being done. Because the engine holds its speed better under load and can work in a more efficient rev range, many users report similar or even lower consumption for the same job – driving style and workload matter most.
Which agricultural brands do you support?
John Deere, Fendt, Claas, Case IH, New Holland, Massey Ferguson, Deutz-Fahr, Valtra, Steyr, McCormick, Challenger, Lamborghini, Kubota, Same, Landini, Antonio Carraro, JCB Fastrac and many more – all brands from our portal are listed above. Unlisted machines are developed on request.
How is a tractor ECU read?
Many agricultural ECUs are read on the bench or in boot mode with tools such as KESS3, K-TAG, Autotuner, Flex or bFlash. Some can be read via the diagnostic port. Upload the read exactly as it comes from your tool.
Are you specialised in agricultural machines?
Yes. Agricultural and construction machinery is one of our main areas: we work with tractor, harvester and telehandler ECUs every day, read on the bench and in boot mode, and develop the file for the exact software version of your machine.
Can you tune harvesters and telehandlers too?
Yes – combine harvesters, forage harvesters, telehandlers and self-propelled sprayers are developed in the same way as tractors.
Agricultural tuning file needed?
Free account, upload the original read, download the calibrated file.