Construction machinery tuning files
Tuning files for excavators, wheel loaders, telehandlers, dumpers and industrial engines – more torque for hydraulics and traction, developed for the exact software of your machine.
- 71 brands · 1080 models
- 1284 engine variants
- Files from €100.00 · options from €50.00
More reserves for heavy duty cycles
Excavators, wheel loaders and dumpers work in constant load cycles: digging, lifting, slewing and driving at the same time. When the engine drops in speed under this combined load, the hydraulics slow down and the cycle time grows. An optimised calibration gives the engine more torque reserves, so it recovers faster and keeps the hydraulics working at full speed.
Construction and industrial machines often use engines from Caterpillar, Cummins, Deutz, Perkins, Volvo Penta, John Deere Power Systems or Liebherr. Many of these engines appear in several different machines – which means one well-developed calibration can be adapted to many applications.
Our database lists machines from more than 70 construction, forestry and industrial brands – Caterpillar, Komatsu, Volvo CE, Liebherr, Hitachi, JCB, Kobelco, Sany, Doosan/Develon, Bobcat, Manitou, Merlo, Wacker Neuson and many more. Because construction machines vary so much, most files are developed on request: upload the read of your machine in the portal and add the machine and engine data.
More hydraulic power
Torque reserves for digging, lifting and loading cycles.
Faster cycles
The engine recovers faster under combined hydraulic and travel load.
Built for duty cycles
Protection functions stay active for continuous operation.
Unlisted machines
Many construction engines are developed on request.
Most common ECUs in this segment
Machines we develop files for
From the mini excavator to the quarry loader – and the forestry and mining machines in between.
Excavators
Crawler, wheeled, mini and midi excavators – Caterpillar, Komatsu, Volvo CE, Liebherr, Hitachi, Kobelco, Develon, Takeuchi, Sany.
Wheel loaders
Compact to large wheel loaders – Volvo CE, Caterpillar, Liebherr, Komatsu, JCB, Kramer, Weidemann, LiuGong, SDLG.
Telehandlers & access
Telehandlers and lifts – Manitou, Merlo, JCB, Dieci, Magni, Genie, JLG.
Dumpers & haulers
Articulated and rigid dumpers, site dumpers – Bell, Volvo CE, Caterpillar, Thwaites, Wacker Neuson, AUSA.
Road & compaction
Rollers, pavers, milling machines and graders – Bomag, Ammann, Wirtgen, Hamm, Caterpillar.
Forestry & recycling
Harvesters, forwarders, crushers and screens – Ponsse, Tigercat, Rottne, Logset, Komptech, Powerscreen, Sandvik, Rayco.
ECU and engine systems we work with every day
Read and write tools we support
Upload the read exactly as it comes from your tool – bench, boot or diagnostic port. We identify ECU and software version automatically.
Construction machinery is one of our core areas
With 71 construction, forestry and industrial brands in the database, we know the engines behind the machines – Cummins, Deutz, Perkins, Caterpillar, Volvo Penta, Isuzu and more. Because the same engine is used in many machines, our calibrators can build on proven calibrations and adapt them to your exact software and duty cycle.
Heavy-duty calibrators
Daily work with Cummins, Deutz, Caterpillar, Denso and Bosch industrial ECUs.
Duty-cycle focus
More torque reserves for combined hydraulic and travel load – faster recovery, shorter cycles.
Protection stays active
Temperature and component protection remain active for continuous operation in dust and heat.
Developed on request
Unlisted machines are developed from your read – tell us the machine, engine and application.
Construction & industrial brands in our database
Select the brand to see every model and engine with stock and tuned figures, ECU and read tools.
Your machine is not listed? Upload the read anyway or contact us – we develop files for unlisted engines on request.
Typical machines
- Excavators – crawler and wheeled excavators, mini and midi excavators
- Wheel loaders and telehandlers
- Dumpers, graders and rollers
- Industrial engines – generators, pumps, compressors and stationary engines
Read more in our guide Excavator and wheel loader tuning – what to know.
What we need for a construction machine file
- The complete original read of the engine ECU (bench or boot mode in most cases).
- Machine data: manufacturer, model, engine manufacturer and type, rated power, operating hours.
- The application – e.g. heavy digging, loading, quarry work – so the calibration matches the duty cycle.
Questions & answers
Which construction machines can be tuned?
Excavators, wheel loaders, telehandlers, dumpers, graders and machines with industrial engines (Caterpillar, Cummins, Deutz, Perkins and others). Most of them are developed on request based on your read.
How much more power is possible?
Typically 10–20%, depending on the engine and how strongly it is limited by software. We tell you the expected result once we have seen the original file.
How is the ECU read?
Most construction and industrial ECUs are read on the bench or in boot mode with professional tools. Always save a full backup of the original before writing.
Are you specialised in construction machinery?
Yes. Construction, forestry and industrial machines are one of our main areas – we work with these ECUs every day, read on the bench and in boot mode, and develop files for the exact software version and duty cycle of your machine.
Which construction brands do you support?
More than 70 brands, including Caterpillar, Komatsu, Volvo CE, Liebherr, Hitachi, JCB, Kobelco, Sany, Develon, LiuGong, Case, New Holland, Bobcat, Manitou, Merlo, Takeuchi, Yanmar and Wacker Neuson. Machines that are not listed are developed on request.
File for your construction machine?
Free account, upload the original read, download the calibrated file.