Truck tuning files for heavy-duty engines
More torque low in the rev range, better pulling on gradients and a calibration made for long distances – for all major European truck brands.
- 9 brands · 50 models
- 577 engine variants
- Files from €100.00 · options from €50.00
Made for the long haul
For a truck, every gear change on a gradient costs time and fuel. A well-developed truck tuning file increases torque low in the rev range, so the truck holds its gear longer, accelerates more easily with a full load and keeps a steadier speed in hilly terrain.
Truck engines are built for very high mileage, and the calibration has to respect that. We optimise injection, boost and torque curves conservatively, keep thermal protection functions active and verify many results on the dyno.
Our database covers MAN, Scania, DAF, Iveco, Volvo Trucks, Renault Trucks and Mercedes-Benz trucks. Engines that are not listed – including buses, coaches and special vehicles – are developed on request.
Torque under load
Stronger pulling with a full load and on long gradients.
Lower rpm, fewer shifts
The engine works more relaxed in the economic rev range.
Built for mileage
Thermal and component protection stays active.
Truck ECUs
Bosch EDC7/EDC17, Delphi, Denso and manufacturer systems.
Most common ECUs in this segment
Truck brands in our database
Select the brand to see every model and engine with stock and tuned figures, ECU and read tools.
Examples from the database
| Machine | Engine | Stock | Tuned | Gain |
|---|---|---|---|---|
| MAN TGM | D2866 460hp | 460 HP / 2000 Nm | 540 HP / 2550 Nm | +80 HP / +550 Nm |
| Volvo Trucks FH | 16 700hp 16.1L | 700 HP / 3150 Nm | 780 HP / 3700 Nm | +80 HP / +550 Nm |
| Iveco Stralis | 560hp | 560 HP / 2500 Nm | 630 HP / 3000 Nm | +70 HP / +500 Nm |
| MAN TGS | 480 - D2676 - Euro 6 480hp | 480 HP / 2300 Nm | 570 HP / 2800 Nm | +90 HP / +500 Nm |
| MAN TGX | 520 - D3876 - Euro 6 520hp | 520 HP / 2500 Nm | 600 HP / 3000 Nm | +80 HP / +500 Nm |
| Renault truck Magnum | 440hp | 440 HP / 2050 Nm | 520 HP / 2550 Nm | +80 HP / +500 Nm |
| Volvo Trucks FM | 12 340hp | 340 HP / 1700 Nm | 430 HP / 2200 Nm | +90 HP / +500 Nm |
| DAF XF | 95 530hp | 530 HP / 2350 Nm | 610 HP / 2830 Nm | +80 HP / +480 Nm |
| Mercedes Benz Trucks Actros | 2048 476hp | 476 HP / 2300 Nm | 550 HP / 2750 Nm | +74 HP / +450 Nm |
| Scania trucks R-Serie | 470 | 470 HP / 2200 Nm | 560 HP / 2650 Nm | +90 HP / +450 Nm |
Your machine is not listed? Upload the read anyway or contact us – we develop files for unlisted engines on request.
Where truck operators notice the difference
- Gradients: fewer downshifts and a steadier speed on motorways with long climbs.
- Heavy loads: easier pull-away and acceleration with full payload or trailer.
- Timber, tipper and agricultural transport: more reserves on construction sites and unpaved roads.
Reading a truck ECU
Many truck ECUs can be read via the diagnostic port with truck protocols; others require bench or boot mode. Always read and save the complete original file before writing. Upload the read in the portal together with the vehicle data – we identify the ECU and software version automatically.
Questions & answers
How much power does a truck remap add?
Usually 10–20% more power and torque, depending on the engine. The exact stock and tuned values for every engine are in our vehicle database.
Which truck brands do you support?
MAN, Scania, DAF, Iveco, Volvo Trucks, Renault Trucks and Mercedes-Benz trucks are listed in the database. Buses, coaches and special vehicles are developed on request.
Is a truck remap safe for high mileage?
Yes – truck files are calibrated conservatively. Smoke limits, temperature protection and gearbox torque limits stay active.
Can I tune a whole fleet?
Yes. Workshops and fleet operators order via the same portal and can use credit packs for better pricing.
Truck tuning file needed?
Free account, upload the original read, download the calibrated file.