Case ih FARMALL 105C - 3.4 - 106hp - Tier 4A tuning file
With 106 HP and 425 Nm the Case FARMALL 105C - 3.4 - 106hp - Tier 4A is well engineered from the factory – but the calibration leaves reserves. Our tuning file releases them: 136 HP and 520 Nm.
Curve shape is illustrative, based on the measured peak values.
What the tuning file changes
In the field the gain is felt as pulling power: the engine holds its speed better under heavy load, needs fewer gear changes and works more relaxed in the efficient part of the rev range.
Safety comes first: protection functions, temperature limits and torque limiters for the gearbox remain in place. The file is developed for the exact software version of your ECU.
How it works
- Read the ECU with your master/slave tool.
- Upload the ORI file in the portal and choose Stage 1 and options.
- Download the MOD file – checksum corrected and ready to flash.
Questions about the Case ih FARMALL 105C - 3.4 - 106hp - Tier 4A
How much power does the Case FARMALL 105C - 3.4 - 106hp - Tier 4A gain?
With our Stage 1 tuning file the engine gains +30 HP and +95 Nm: from 106 HP / 425 Nm to 136 HP / 520 Nm.
Which ECU does the Case FARMALL 105C - 3.4 - 106hp - Tier 4A use?
This engine uses a Bosch EDC17C49 engine control unit.
How do I order the tuning file?
Open a free account in our portal, upload the original read (ORI file) of the ECU and choose Stage 1 and the options you need. Most files are ready within minutes.
Is the tuning file safe for the engine?
Yes. The file is developed per software version and keeps the protection functions of the engine and gearbox active. Many of our files are verified on the dyno.
Get the Case FARMALL tuning file
Free account, upload the ORI file, download the dyno quality MOD file.