Land Rover Defender D250 (3.0D) 250hp tuning file
The Land Rover Defender D250 (3.0D) 250hp (2019 ->) leaves the factory with 250 HP and 570 Nm. With our dyno quality Stage 1 tuning file it delivers 270 HP and 620 Nm – that is +20 HP (+8%) and +50 Nm (+9%).
Curve shape is illustrative, based on the measured peak values.
What the tuning file changes
Typical for a turbo diesel, the biggest improvement is in torque between 1,800 and 3,000 rpm. The car pulls harder from low revs, needs fewer downshifts and feels more relaxed with a trailer or full load.
Safety comes first: protection functions, temperature limits and torque limiters for the gearbox remain in place. The file is developed for the exact software version of your ECU.
How it works
- Read the ECU with Autotuner.
- Upload the ORI file in the portal and choose Stage 1 and options.
- Download the MOD file – checksum corrected and ready to flash.
Questions about the Land Rover Defender D250 (3.0D) 250hp
How much power does the Land Rover Defender D250 (3.0D) 250hp gain?
With our Stage 1 tuning file the engine gains +20 HP and +50 Nm: from 250 HP / 570 Nm to 270 HP / 620 Nm.
Which ECU does the Land Rover Defender D250 (3.0D) 250hp use?
This engine uses a Bosch MEDC17.9 / Bosch MD1CP007 engine control unit. It can be read with Autotuner.
How do I order the tuning file?
Open a free account in our portal, upload the original read (ORI file) of the ECU and choose Stage 1 and the options you need. Most files are ready within minutes.
Is the tuning file safe for the engine?
Yes. The file is developed per software version and keeps the protection functions of the engine and gearbox active. Many of our files are verified on the dyno.
Get the Land Rover Defender tuning file
Free account, upload the ORI file, download the dyno quality MOD file.